About Us

Who We Are

Wake Forest EV Charger Pros is a local resource for EV charger installation in Wake Forest, NC. Home charging here depends on details that change from one street to the next: which utility serves the address, which office issues the permit, and how much room is left in the panel. We know those details, and we built this site around them. The EV charging FAQ gathers every question we answer in one place.

Installs are done by independent electricians licensed in North Carolina. When you call, you speak with a licensed local electrician who can talk through your setup.

What We Know About Charging in Wake Forest

• Three utilities. Wake Forest Power, Duke Energy Progress, and Wake Electric each serve part of the area. Each has its own rules and programs, like Duke’s Charger Prep Credit and Wake Electric’s off-peak EV rate. See rebates and incentives.
• Three permit offices. The Town of Wake Forest, Wake County, and Franklin County each handle permits differently. See permits and inspections.
• One code. North Carolina enforces the 2020 National Electrical Code with state amendments. Article 625 covers EV charging equipment.
• Many kinds of homes. Newer subdivisions often have 200A panels. Older homes downtown and in Franklinton may have 100A or 150A service. Rural lots near Falls Lake often need long wire runs.

How We Keep Our Guides Accurate

Every code, permit, utility, and rebate detail on this site comes from the official source. That means the NC Office of State Fire Marshal, the North Carolina State Board of Examiners of Electrical Contractors, the Town of Wake Forest, Wake County, Franklin County, Duke Energy, Wake Electric, and Wake Forest Power. Rules and programs change, so confirm current details before you rely on them. We do not publish prices, because every home is different.

What a Good Install Looks Like

• The electrician holds a current license from the North Carolina State Board of Examiners of Electrical Contractors. You can check any license on the Board’s free public lookup.
• A load calculation confirms your panel can carry the new circuit.
• The circuit is sized at 125% of the charger’s load, per NEC Article 625.
• A permit is pulled and a final inspection is passed on every new 240V circuit.
• You ask for a written quote before work starts.

How to Check an Electrician’s License Before You Hire

In North Carolina, electrical contractors are licensed by the North Carolina State Board of Examiners of Electrical Contractors (NCBEEC). Checking a license is a simple way to know who is working on your panel. Check the license of any contractor you consider, no matter who recommends them.

What a Real License Number Looks Like

Under the Board’s rules, every license number carries a letter suffix that shows its class. It is written as the number followed by the class, such as 12345-U. That number is only an example, not a real license.

• Limited (-L): single projects up to a value limit set by the Board, on equipment rated 600 volts or less.
• Intermediate (-I): single projects up to a higher value limit set by the Board.
• Unlimited (-U): any electrical contracting project, regardless of value.
• Special Restricted (-SP-…): narrow licenses for one kind of work, shown with extra letters. For example, SP-SFD covers only wiring in, on, or serving a single-family detached home. A detached home is one not attached to any other building, so an SP-SFD license does not cover an attached townhome or a condo. Other special restricted classes cover work such as fire alarm and low voltage systems (SP-FA/LV).

How to Verify a License on the NCBEEC Lookup

1. Ask the contractor for their license number and class in writing, ideally on the quote.
2. Open the Board’s free public lookup (Verify License Search) at arls-public.ncbeec.org. You can search by license number, business name, or the qualifier’s name.
3. Confirm the license status is active. An expired license is the same as no license.
4. Confirm the class fits the job. An EV charger at an attached townhome needs a class beyond SP-SFD, and a large commercial project may need Intermediate or Unlimited.
5. Make sure the business name on the license matches the name on your quote, your invoice, and the electrical permit.

If anything does not match, call the Board at (919) 733-9042 before work starts. When a contractor pulls the electrical permit, the permit record should show the same business. See our permits and inspections guide for your local office.

What We Cover

Home charging is the heart of it: Level 2 chargers, Tesla Wall Connectors, NEMA 14-50 outlets, and panel upgrades. We also cover commercial and multifamily charging and charger repairs across Wake Forest and the surrounding service areas.